Compression Molding Process / SMC
Compression Molding Process / SMC
This process produces high strength, complex parts in a wide variety of sizes. Matched metal dies are mounted in a hydraulic molding press. The material charge is manually or robotically placed in the mold, heated mold halves are closed, and up to 2,000psi of pressure is applied. Cycle time ranges from one to five minutes depending on part size and thickness. Features such as ribs, bosses and inserts can be molded in.
Compression molded parts are characterized by net size and shape, two excellent finished surfaces and outstanding part-to-part repeatability. Trimming and finishing costs are minimal.
- In-mold coatings are available to improve surface paintability, eliminating the need for primer.
- Color compounds can be customized.
- Male and female tools are commonly made from tool-grade steel. Where pressure is <400psi, other tooling materials can be used.
- Tools are generally capable of running temps of 300˚F and pressures about 1000psi, depending on contour.
- Tools generally run 60,000 parts before restorative shear work is needed*.
SMC Material Formulation
In addition to fabrication, MFG develops and manufacturers SMC material, offering more than 100 proprietary material formulations. Our off-the-shelf SMC can eliminate or reduce development time, translating to cost savings. In other cases, a custom formula may provide the greater cost-savings though weight reduction, shorter cycle time or design efficiency. Either way – our dedicated SMC laboratory is ready to support you. (see video for more info)
* Volume recommendations are averages and provided only as a general guideline. Actual volume efficiencies are a more complex matter requiring detailed statistics about the part to be manufactured.
MFG's SMC Compression Molding Capabilities
|Compression Molding Capabilities for FRP Composite Custom Applications||Video||Short video that describes and demonstrates MFG's volume compression molding capabilities. Includes presses from 100 to 3000 tons for SMC, LCM and carbon fiber.|
|Innovation in Sheet Mold Compound||Video||Behind the scenes of iCom, part of North America's largest independent composing molding company. iCom was created as part of the company's commitment to advancing the standards of technical excellence in sheet molded composite and liquid composite molding formulation and manufacturing.|
|iNVENTA™ 74109 Ultra Light SMC Material||The ultimate material for mass reduction, featuring a specific gravity under 1.11 (~60% lighter than standard SMC formulations).|
|Mass Reduction With Value-Engineered Composites||Guidance for light-weighting (mass reduction) of products using advanced composite materials.|
|Technical Design Guide for FRP Composite Products and Parts||Fiberglass (FRP) composite materials and processes are explained in detail. This design guide outlines various selection criteria with helpful technical data and comparisons to alternative materials.|
|Guide for Selecting Best FRP Composite Process||Guidelines for Selecting the Best FRP Composite Process for Your Project|
|TechNote: Designing Ribs Into Your SMC Part||Designed-in ribs can add enhanced stiffness to your SMC part. Here's a quick "how-to" for incorporating ribs for optimum manufacturability.|
|UL Certified FRP Materials from MFG||List of proprietary MFG materials that are UL-approved.|
Snapshot Guide: Shapes, Uses and Considerations
All applications with volumes 10,000+. Capable of detailed shapes, extremely good surface finishes (including Class A automotive surfaces), high part uniformity.